![From QSR to QMSR: Meeting FDA’s New Requirements From QSR to QMSR: Meeting FDA’s New Requirements](https://www.fdanews.com/ext/resources/Book-Covers-NEW/From-QSR-to-QMSR-500.png?height=200&t=1714569011&width=200)
Home » FDA: Porton Failed to Follow Contamination Procedures, Notify Agency of Product Changes
FDA: Porton Failed to Follow Contamination Procedures, Notify Agency of Product Changes
January 31, 2017
FDA served U.K.-based Porton Biopharma a warning letter after an inspection revealed failures to notify the agency of changes affecting drugs, and failing to follow procedures to prevent microbiological contamination.
A March 2016 inspection of Porton’s London facility revealed deficiencies that persisted following discussion during a regulatory meeting between the agency and the firm in late 2015 — including a lack of environmental monitoring within the Restricted Access Barrier Systems, and not using a sporicidal disinfectant on surfaces inside an aseptic filling room, even though the firm’s environmental monitoring had detected spore-forming organisms.
The agency also discovered new deficiencies, including a floor exhaust vent used to remove air entering the filling room that was blocked by ancillary equipment during media fill simulations. Inspectors also found inadequate validation of a sterilization cycle used on equipment to be transferred to an aseptic filling room.
Upcoming Events
-
21Oct